The Investigation of bond strength between reinforced glass ceramics and adhesive systems with different shelf life
Bond strength of adhesive systems with different shelf-life
DOI:
https://doi.org/10.5281/zenodo.8265736Keywords:
Reinforced glass ceramics, Bond strength, Shelf-lifeAbstract
Aim: To investigate the bonding capability of resin cement with different shelf-lives and also, to examine the microshear bond strength between various reinforced-glass ceramics and composite resin cement.
Materials and methods: Three different glass ceramic blocks were used in this study; Leucite-reinforced glass ceramic (LRC), lithium silicate glass ceramic reinforced with zirconia (ZLC) and lithium-disilicate glass ceramic (LDC). The blocks were cut with a saw with the thickness of 1 mm. and placed in acrylic molds. The composite rods prepared in 1mm. diameter and they were bonded to ceramic surfaces with resin cement (Multilink N, Ivoclar AG) with three different shelf lives (Group 1: Not-past shelf-life, group 2: shelf-life past 6 months, group 3: Shelf-life past 12 months). Microshear bond strength test was applied to the samples.
Results: According to the statistical analysis, a significant difference was found between leucite-reinforced glass ceramic (LRC) and lithium-disilicate glass ceramic (LDC) in the group 3 (p=0.047). In all three ceramic samples, significant difference was found between group 1 and group 2 (p=0.007). There was no statistically difference between LDC, LRC, ZLC samples in the group 1.
Conclusion: Resin cement with shelf-life past 12 months decreased the bond strength, while resin cement with shelf-life past 6 months did not affect the bond strength.
References
Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015; 113:534-40.
Elsaka SE, Elnaghy AM. Mechanical properties of zirconia reinforced lithium silicate glass-ceramic. Dent Mater 2016; 32:908- 14.
Gracis S, Thompson VP, Ferencz JL, Silva NR, Bonfante EA. A new classification system for all-ceramic and ceramic-like restorative materials. Int J Prosthodont 2015; 28:227-35.
Vargas MA, Bergeron C, Diaz-Arnold A. Cementing all- ceramic restorations: recommendations for success. J Am Dent Assoc. 2011; 142: 20-4.
Lima RBW, Barreto SC, Alfrisany NM, Porto TS, De Souza GM, De Goes MF. Effect of silane and MDP-based primers on physico-chemical properties of zirconia and its bond strength to resin cement. Dent Mater 2019; 35: 1557-67.
De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res. 2005;84(2):118-132.
T. Tian, J.K.-H.Tsoi, J.P.Matinlinna, M.F.Burrow,“Aspects of bonding between resin luting cements and glass ceramic materials,” Dental Materials, vol. 30, no. 7, pp. e147–e162, 2014.
G. B. Guarda, A. B. Correr, L. S. Gonc ̧alves et al., “Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic,” Operative Dentistry, vol. 38, no. 2, pp. 208–217, 2013.
A. Della Bona, K. J. Anusavice, and J. A. A. Hood, “Effect of ceramic surface treatment on tensile bond strength to a resin cement,” International Journal of Prosthodontics, vol. 15, no. 3, pp. 248–253, 2002.
R. C. R. Colares, J. R. Neri, A. M. B. de Souza, K. M. D. F. Pontes, J. S. Mendonc ̧a, and S. L. Santiago, “Effect of surface pretreatments on the microtensile bond strength of lithium- disilicate ceramic repaired with composite resin,” Brazilian Dental Journal, vol. 24, no. 4, pp. 349–352, 2013.
G. M. Iorizzo, F. Prete, B. Mazzanti, G. Timellini, R. Scotti, and P. Baldissara, “Effects of hydrofluoric acid etching on lithium disilicate,” Dental Materials, vol. 30, p. e24, 2014.
P. Kursoglu, P. F. K. Motro, and H. Yurdaguven, “Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface,” The Journal of Advanced Prosthodontics, vol. 5, no. 2, pp. 98–103, 2013.
Yiqiao Wang, Ruizong Hui, Li Gao, Yuanyuan Ma, Xiangnan Wu, Yukun Meng, Zhichao Hao, Effect of surface treatments on bond durability of zirconia-reinforced lithium silicate ceramics: An in vitro study,The Journal of Prosthetic Dentistry,Volume 128, Issue 6,2022, Pages 1350.e1-1350.e10.
Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent 2007;98: 389-404.
Yoshida K, Tsuo Y, Atsuta M. Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler. J Biomed Mater Res B Appl Biomater 2006; 77:28-33.
Awad MM, Alhalabi F, Alshehri A, Salem MA, Robaian A, Alghannam S, Alayad AS, Almutairi B, Alrahlah A. Silane-Containing Universal Adhesives Influence Resin-Ceramic Microtensile Bond Strength. Coatings. 2023; 13(2):477
Thompson J, Stoner B, Piascik J, Smith R. Adhesion/ce- mentation to zirconia and other non-silicate ceramics: Where are we now Dent Mater 2011;27: 71–82.
Bielen V, Inokoshi M, Munck JD, Zhang F, Vanmeensel K, Minakuchi S, Vleugels J, Naert I, Van Meerbeek B. Bonding Effectiveness to Differently Sandblasted Dental Zirconia. J Adhes Dent 2015; 17:235-42.
Altan B, Cinar S, Tuncelli B. Evaluation of shear bond strength of zirconia-based monolithic CAD-CAM materials to resin cement after different surface treatments. Niger J Clin Pract 2019; 22:1475-1482.
Tanaka R, Fujishima A, Shibata Y, Manabe A, Miyazaki T. Cooperation of phosphate monomer and silica modification on zirconia. J Dent Res 2008; 87:666–670.
Senyilmaz DP, Palin WM, Shortall ACC, Burke FJT. The effect of surface preparation and luting agent on bond strength to a zirconium-based ceramic. Oper Dent 2007; 32:623–630.
Peumans M, Valjakova EB, De Munck J, Mishevska CB, Van Meerbeek B. Bonding Effectiveness of Luting Com- posites to Different CAD/CAM Materials. J Adhes Dent 2016; 18(4):289-302.
Sabbagh J, Nabbout F, Jabbour E, Leloup G. The effect of expiration date on mechanical properties of resin composites. J Int Soc Prevent Communit Dent 2018;8:99-103.
Aziz, Ahmed. Evaluatıon of mechanıcal propertıes of expıred and non-expıred resın composıte. A comparatıve study. Egyptian Dental Journal. 2019; 65. 619-628. 10.21608/edj.2019.72820
Eliguzeloglu Dalkilic E, Donmez N, Kazak M, et al. Microhardness and water solubility of expired and non-expired shelf-life composites. Int J Artif Organs. 2019 Jan;42(1):25-30. doi: 10.1177/0391398818790626. Epub 2018 Jul 30. PMID: 30058467.
Mazzitelli C, Maravic T, Sebold M, et al. Effect of shelf-life of a universal adhesive to dentin,International Journal of Adhesion and Adhesives, 2020;102, 102673,
Moszner N, Salz U, Zimmermann J. Chemical aspects of self-etching enamel-dentin adhesives: A systematic review. Dent Mater 2005; 21: 895-910.
Fallo GJ, Wakefield CW, Czerw RJ. Effects of uncontrolled outdoor storage on the polymerization, manipulation, and appearance of visible light‐cured composite resin and resin‐modified glass ionomer materials. Mil Med 1996;161:290‐3.
Van Meerbeek, B., Peumans, M., Poitevin, A., Mine, A., Van Ende, A., Neves, A. ve diğerleri. (2010) Relationship between bond-strength tests and clinical outcomes. Dental Materials, 26 (2), e100-e121.
Braga, R.R., Meira, J.B., Boaro, L.C.,Xavier, T.A. (2010) Adhesion to tooth structure: a critical review of “macro” test methods. Dental Materials, 26 (2), e38-e49.
Cardoso, P.E., Braga, R.R.,Carrilho, M.R. (1998) Evaluation of micro-tensile, shear and tensile tests determining the bond strength of three adhesive systems. Dental Materials, 14 (6), 394-398.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 EJONS INTERNATIONAL JOURNAL
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
